Rescue Life 9 with Carry Case

Rescue Life 9 is the new flagship product resulting from the continuous research and development carried out for more than 30 years by Progetti Medical. The device uses biphasic waveform technology (BTE) which makes it easy to compensate the shock waveform to match the patient’s impedance. Based on the measured patient impedance, the biphasic technology adjusts the duration of current flow to optimize the effectiveness of shock delivery. A message on the display indicates the correct impedance level detected by the defibrillator before discharging. Technical Specifications: GENERAL REQUIREMENTS: Dimension & weight • 335 x 225 x 360 mm, • 6,5 Kg with dual batteries Electrical: AC 100-240 VAC, 50/60 Hz • Rechargeable dual batteries: 15.0 V 3.2 Ah Lithium-ion Battery Operation Time • >5 hours, >10 hours with dual batteries Battery Charge Time • Max. 3 hours Capacity • 150 shocks with single battery or 300 shocks with dual battery at 230J fully charged Software • Voice and texts multi language Memory• Internal flash for ECG data, events and usage review up to 10 hours. ENVIRONMENT: Temperature • Operational -5 ~ 46C, • Storage -20 ~ 50C, • Relative humidity 10 ~ 95% Isolation • ECG type CF, Defibrillation type BF Ingress protection • IP4X DEFIBRILLATION: Waveform • Biphasic Truncated Exponential (BTE), HiCAP technology (Large storage capacitor) Impedance • Compensated, range 25 – 200 Ohm Charge time • 8 sec for 230 J with battery fully charged AED MODE: Energy • Fixed energy at 200 J Protocol • ERC 2015 CPR Guidelines with voice and text prompts Shockable rhythms • VF with amplitude > 0.15 mV and VT with rhythm >150 bpm Sensitivity •Shockable rhythm-VF > 95%, Shockable rhythm-VT > 75% Specificity • According to ERC 2015, Normal sinusoidal rhythm > 99% • Asystole and other non-shockable rhythms > 99% MANUAL MODE: Energy range • 1 – 230 J (from 1-10 J in 1 J steps; from 10 to 230 J in 10 J steps) Commands • Multifunction trim knob. Charge and shock button directly in the front panel for hands-free defibrillation Paddles • Reusable adult & Pediatric defi paddles with charge/shock command • Disposable defi pads and internal defi paddles (optional) Operating mode • ECG « R » wave synchro or sync mode Indicators • Battery and main led indicators • Clear and visible backlight color buttons. DISPLAY: Type • High contrast TFT color LCD 8.4’’ (800X600dots) Information • Operational information, ECG traces, Spo2 value, NIBP values, etCO2, TEMP, Heart Rate indicator, filters, alarms and battery status Display mode • Can select 3, 6, 12 ECG leads ECG MONITORING: Bandwidth • 0.05 – 120 Hz (-3 db) in diagnostic mode • 0.6 – 40 Hz (-3 db) in monitoring mode CMRR • > 98 db Input impedance • > 50 Mohm Input • Patient cable 3 leads (selectable I, II or III) – optional • Patient cable 5 leads (I, II, III, aVL, aVF, aVR, V) – standard • Patient cable 10 leads (I, II, III, aVL, aVF, aVR, V1…..V6) – optional Gain • 2,5, 5, 10, 20, 40 mm/mV Speed • 5, 10, 25, 50 mm/sec Filters • 50/60 Hz, EMG Filter, base line HR Range • 20 – 300 bpm (~ 2%), digital readout on the display Alarm • HR max settable 250 bpm; HR min 20 bpm PRINTER: Type • Integrated thermal 3 channels printer for ECG traces and events documentation hardcopy including HR/SpO2/NIBP/etCO2/TEMP values Paper speed • 5, 10, 25, 50 mm/sec Paper width • 58 mm Operating model • Manual, automatic (12” pre and post shock recording)

• Medical Supplies & Equipment Brand: Abronn